Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 59.08x245mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 1.9mm and the Actual Depth is 1.5mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Transmission Distance: 4
PLA Hatchbox Purple Transmission Distance: 2.6
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Blue
At layer #8 (0.72mm) swap to Purple
At layer #13 (1.12mm) swap to White for the rest.