Eagle & US Flag

This model was created using the Hueforge application. It uses four colors (black, red, jade white, & blue) and is 200x200mm.  There are a lot of tutorials online that explain how to print HueForge models if you've never done this before.

Important slicer settings:

• Set the Layer Height in your slicer to 0.2mm with a base layer of 0.16mm
• Set infill to 100%

Setting colors:

Select black as the print color after adding this model to your slicer. Then, configure your slicer to change to the following colors on the appropriate layer.

• Start with Black
• At layer #3 (0.56mm) swap to Blue
• At layer #6 (1.16mm) swap to Red
• At layer #8 (1.56mm) swap to Jade White for the rest.