This model was created using the Hueforge application. It uses three colors (black, red, white, & blue) and is 200x200mm.  There are a lot of tutorials online that explain how to print HueForge models if you've never done this before.

Important slicer settings:

• Set the layer height in your slicer to 0.2mm.
• Set infill to 100%

Setting colors:

Select black as the print color after adding this model to your slicer. Then, configure your slicer to change to the following colors on the appropriate layer.

• Layer #3 - swap to BLUE
• Layer #6 - swap to RED
• Layer #8 - swap to WHITE