This is a bezel/mount for the 6 gang auxbeam switch panel. I designed this my self to be able to mount the switch panel in the headliner of my F-150 above the review mirror. In addition, to mount the bezel in the headliner like have in the pictures you will need two ½" magnets, four ¼" countersunk screws, 4 washers, as well as 4 lucking nuts. The magnets are glued into place to be able to hold the switch panel securely, as well as allowing you to easily remove it if needed. You will have to cut the tabs off of the end of the original mounting hardware that came with your auxbeam switch for it to fit in the bezel as well as for the magnets to have something to grab onto. Please review all of the pictures to see how everything works. You can simply get all the non-printed parts from your local HomeDepot and it shouldn't cost you more than $20.