Union Pacific toy train (BRIO / IKEA compatible). This is the older model with 2 types of screws - the newer ones are far better designed and use only 1 type of screws for everything (check the link to my premium toy trains below).
You will need 10 screws to put everything together:
8x ISO 14585 2.9mm x 13mm
2x ISO 14585 2.9mm x 19mm
You can also add magnets on each side of the train, by using additional 2x ISO 14585 2.9mm x 13mm screws a plastic washer and small neodymium ring magnets diameter 10mm outer / 4mm inner with height of 5mm.
The GCODE contains 2 filaments color changes at 2.80mm (Layer 24) and 16.80mm (Layer 141) and the support enforcer.
If you enjoy these models and want to support me, check out my new toy trains with wagons, here:
Lovely 3D printed Toy Trains
Add support enforcer for the roof! See image above where to put it.
The GCODE already contains 2 filaments changes at 2.80mm (Layer 24) and 16.80mm (Layer 141) and the support enforcer. Printed with Prusament PLA Silver, Yellow, Galaxy Black.