Lightbulb
Lightbulb
Print Profile(1)
Description
I upload the STL because the time out slicer issue. (Push “Download or Print” and Download STL.)
Don't touch the height if you scale the model.
I try many colors and just those work well.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 240x135mm in size
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Blue Gray
At layer #17 (1.44mm) swap to Ash Gray
At layer #18 (1.52mm) swap to Jade White for the rest.
The frame is cut at the bottom to get more stability. I added a pusher because its very snug. You can color the face of the frame have fun !
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
