Heyho!
Here in Germany the weather is quite bad at the moment but I want to grow some plants that need good some good light and higher temperatures than we have outdoors.
So I designed this plant pot to improve the “situation” at my window stills!
Design advantages:
Print Instructions:
You can print the pot in Vasemode. But I would recommend to use a bigger Nozzle/ extrusion width ≥ ,8 mm. If you use a ,4 mm Nozzle I would not recommend it.
Layer height doesn't really matter. I used PLA and had no problems.
A)
B)
C)
D)
E)
The File “M” is the “L” file scaled down to 80%.
The File “M_low” is the “L” file scaled down to 80% and 60% in Z direction.
Have fun!