A sushi shop aquarium decoration that your fish can hide in.

There are pockets on the inside of the base that you can use to put small pebbles or aquarium substrate to sink it to the bottom.

Printing

Printed in 3 parts

• The base is printed in it's normal orientation and requires no supports. Mine printed very well a 0.2 layer height.
• The roof is printed upside down and also requires no supports at 0.2 layer height. I used a color change for the top structure but this is of course optional.
• The sign is printed flat at 0.2 layer height. I used manual color changes.

Parts are glued together using C.A. glue or quick set epoxy.

The base measures 2,5in x 4in but I imagine this model scales pretty well to fit your needs as the fit tolerances are intentionally pretty loose.

Enjoy!

And If you have a minute, check out my other models!