The original webpage for this post is on Printables. It was transferred here through the automated system, so some formatting, file links, etc. may not work as intended. Please see Printables for original post or see my full collection of designs on Cults3D. -Abby

I designed this ornament as a Christmas gift for my nephew and his fiancée. Here I provide the base model with the decorations so that others may enjoy it as well.

Important Note

Text for the ornament is not provided. You will need to use Tinkercad, another CAD or design program, or a slicer that allows the addition of lettering to fill in names, dates, and/or a message.

3D Printing Settings

Ornament is approximately 90 x 101 x 4.50 mm. The back of the ornament is to height 3.00 mm. The heart and bells are 0.75 mm thick and therefore end at height 3.75 mm. The ribbon is an additional 0.75 mm thick ending at 4.50 mm. My text is the same height as the ribbon, but it could be set with the bells and heart or at its own level.

I printed with two colors, but this could easily be printed with three colors (two filament swaps). The heart could be a fourth color separate from the bells with some additional work and/or equipment.

I printed with 0.25 mm layer height. I used various infill, perimeter, and top/bottom layer settings for the different levels. No raft. No supports.

More of my designs on Cults3D: https://cults3d.com/en/users/abbymath
Not for commercial use. No derivatives. See license below.