This portable bidet is designed to fit standard PET bottles, making it a convenient hygiene solution for on-the-go use. The 13cm long angled nozzle ensures easy aiming, and the bidet can be stored with the nozzle inside the bottle to prevent leakage. To assemble, drill two PET bottle caps with a 16mm bit, cut and smooth the threaded part from a PET bottle, and use epoxy to glue the caps and threaded part to the bidet. Detailed assembly instructions are available in the video: Assembly Instruction Video.

Parts you need:

• A good 2-component epoxy glue for a water-tight fit
• 2 PET Bottle Caps
• 16mm drill bit or a knife and some patience to make the hole in the caps
• Optional: 1 PET Bottle for cutting off the threaded part if you want a cap for the bidet in storage mode

Assembly Instruction: