If you enjoy my works please consider leaving a Boost and a Like, that keeps me motivated to create more!

A round puzzle of a beautiful landscape.

It can be printed in different colors.

To change the color just swap out the red for the color of your liking!

If you print it please share your pictures :). I would love to see different colors!

In the Puzzle I use a clearance of 0.2mm some pieces need to be separated by hand but they print without fusing (be careful when separating the pieces). You can use this clearance test to see if the clearance is good for your printer:

https://makerworld.com/en/models/478428#profileId-389631

The picture without the puzzle can be found here:

https://makerworld.com/en/models/490460#profileId-403887

Here is a box designed to hold the puzzle:

https://makerworld.com/en/models/481714#profileId-393570

I will soon upload the matching lid.

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to White
At layer #19 (1.6mm) swap to Red
At layer #25 (2.08mm) swap to White for the rest.

To use it without AMS:

• Use the normal profile
• Slice the profile
• On the right put a pause at Layer 8,19 and 25
• This will Trigger a manual Pause at this Layer where you can then change the filament

Enjoy!