Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 225.45x230.32mm in size
You may print at higher layer heights below the Min Depth of 1mm
The Max Depth is 3mm and the Actual Depth is 2.3mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA Kexcelled Fluorescent Yellow Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #20 (1.68mm) swap to Blue Gray
At layer #22 (1.84mm) swap to Fluorescent Yellow
At layer #25 (2.08mm) swap to Jade White for the rest.