Modernistic Tealight Sanctuary - Tealight holder by Covic 3D

Covic 3D

Household>Decor

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 7% infill

Designer

3.8 h

2 plates

4.6(30)

0.2mm layer, 2 walls, 15% infill ABS

4.2 h

2 plates

5.0(1)

0.24mm layer, 2 walls, 10% infill

6.8 h

2 plates

Boost

103

173

175

360

Released

Description

Dive into an era of elegance and modern design with our sculptural STL model for a tealight holder.

Precisely designed for 3D printing, this model showcases an array of geometric vertical panels converging into a stunning visual centerpiece. Once printed, its dark, matte finish can evoke a sense of sophistication.

The gaps between each panel allow the gentle glow of a tealight to shine through, casting intriguing shadows and illuminating a space with warm light.

A perfect addition to contemporary interiors, this model is not just a functional item but a design statement that will stand out in any setting.

Buy me a coffee to keep the creativity flowing. Your support helps me continue providing free commercial models for everyone.
https://www.buymeacoffee.com/icovic

You can check also my other design here:

Comment & Rating (45)

@SusiKnalltuete

I love these designs from the candle holders, look noble, simple and timelessly modern. The "Tealight holder - Home decor" is my absolute favorite! Great to print and easy to put together. On this model here, Modernistic Tealight Sanctuary, printing wasn't a problem either, but putting it together was extremely difficult and annoying. Unfortunately, due to the effort needed to put it together, the upper thin mounting ring cracked (see photo with marking), so that I could no longer use the last two rods firmly. Conclusion: looks mega, great model, but I wouldn't print it again. . . unless the model is adjusted a bit, so it's easier to build together. Then I would definitely reprint it! Maybe an update would be possible? I would really like it (and more designs of that kind, definitely!)

The designer has replied

@Covic3D

Thank you for your comment; it was very helpful. I will make a version with larger tolerances. It's hard to make it 100% suitable for everyone since not every filament is the same, but I will definitely create a version with larger tolerances.

@SusiKnalltuete

oh, that would be fine! i used Bambu PLA Matte filament and the standard setting from Bambu slicer for the X1C. Thanks for your immediate answer and your work!

@Heyholetsgo

Print Profile

0.2mm layer, 2 walls, 7% infill

looks amazing 🤗🔥

(Edited)

The designer has replied

@Covic3D

Perfect job! Thank you!

@SreshMakes

Print Profile

0.2mm layer, 2 walls, 7% infill

Great model and profile! Prints and assembles with ease, looks great :)

The designer has replied

@Covic3D

Really cool! Thank you!

@alvesbanquartle

Print Profile

0.2mm layer, 2 walls, 7% infill

The designer has replied

@Covic3D

I would like to see white assembled! Thank you!

@CMO_Projekt

Print Profile

0.2mm layer, 2 walls, 7% infill

(Edited)

@marrena

Print Profile

0.2mm layer, 2 walls, 7% infill

sadly nothing fit together. I thought this was same creator of one they printed perfectly but apparently not?

(Edited)

The designer has replied

@Covic3D

I am truly sorry to hear that the parts are not fitting together for you. Please check the settings of your printer and the materials you are using. I have printed several versions and they all fit properly. The design is intended for the parts to join with a bit more difficulty to ensure everything stays in place as it should. I hope this information helps in resolving your issue.

@marrena

sadly tried again and this time through Bambu Studio instead of Bambu Handy, and still had issues. I have no problems with your other files. I wish I could get this one to work.

@marrena

Finally got one together but it took my husband using channel locks and pressing down on a cutting board to get together, so much much lighter than your other models. That said, it is beautiful.