Shattered Green Lantern Hueforge Wall/Desk Decor
Printed on Bambu A1
Actual Colors Used:
PLA Elegoo Black
PLA Elegoo White
PLA Bambu Basic Green
PLA Bambu Basic BambuLab Green
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.18mm
The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.74mm
The Max Depth is 2.5mm and the Actual Depth is 2.6mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Green Transmission Distance: 2
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.98mm) swap to Green
At layer #16 (1.38mm) swap to BambuLab Green
At layer #21 (1.78mm) swap to Jade White for the rest.