A simple box with and I added a cutout lid. I wanted to keep my wife's Tarot in good condition.

TLDR ---

This would work with many decks I would imagine. 124mm x 74mm x 32mm inner clearance.

The lid and box are in the same file but many programs will let you separate objects into separate bodies. Then you could print the lid a different color if you wished, and do not have an AMS. It's a firm fit, so you may need to clear the path, smooth it, or work the lid a few times. The firmness is okay in my opinion since this is a Tarot Deck is bound to see many open/shuts. Even if this is storage etc., I would expect the wear to happen and a smooth grove to form. With time, the seasoned box will strike a balance with the deck, and all with be smooth again. The cards told me. :) I keed I keed… Enjoy, this is a neat practice if you have never experienced the various versions of Tarot. An intuitive reading is a fun experience. “The Fool” as the chosen foil card is due to the depth that the card represents. Oh and “Deck size matters.” If you know you know.

The raised letters/logo starts at 2.5mm and is 1mm high.
Used the default standard settings. .2mm, 0.4mm nozzle

• 
  The game deck used for this was: This one on Amazon.
• 
  White PLA: https://amzn.to/3VdFzCG
• 
  Black PLA: https://amzn.to/3R2hdcB
  

*V5 cuts the groves out by 0.05mm on each side of the lid for more clearance

Tips are always welcome. I use CashApp. $ChickenCordon