视频：https://www.bilibili.com/video/BV1gy411z7rj/?spm_id_from=333.999.0.0

其中蜘蛛模型来自：https://makerworld.com/zh/models/430495?from=search#profileId-334982

在本模型中仅用于演示如何将模型封入 PETG 透明琥珀之中，你可以将其替换成任何你想要的模型。

你需要使用ams / mas lite ，同时拥有透明耗材和

请完全按照我文本内的方法制作，否则不能产生透明的效果

1 层高 需要设置成0.1

2 线宽填充请按照我提供文件的设置进行

3 关闭所有的模型风扇，在任何时候不打开模型风扇

4 将耗材的流量体积设置成1.1

4 一次性打印两个模型，使其模型有足够的时间自然冷却

5 开启延迟摄影，其目的也是为了使模型拥有足够的时间自然冷却

本模型需要两种petg 耗材

如果你使用了本文参数设计了其他玻璃模型，请引用并注明使用本文的实验成果

If you have used the parameters from this paper to design other glass models, please cite and acknowledge the use of the experimental results from this paper.

Video（bilibili）：https://www.bilibili.com/video/BV1gy411z7rj/?spm_id_from=333.999.0.0

The spider model is from: https://makerworld.com/zh/models/430495?from=search#profileId-334982

In this model, it is only used to demonstrate how to encapsulate the model in transparent amber PETG. You can replace it with any model you want.

You need to use AMS / MAS lite, along with transparent filament.

Please follow my instructions exactly, otherwise, you will not achieve the transparent effect.

1. Set the layer height to 0.1.
2. Set the line width fill according to the settings provided in my file.
3. Turn off all model fans and do not turn them on at any time.
4. Set the material flow volume to 1.1.
5. Print two models at once, giving them enough time to cool naturally.
6. Enable time-lapse photography to give the models enough time to cool naturally.

This model requires two types of PETG filament.

下面是给拖竹切片软件制作团队的留言：

请给软件增加透明色功能和透明色预览的功能。

请想办法增加一个可变的流量体积，不然最后一层会溢出太多。

Here is a message for the bambu Slicing Software team:

Please add a transparent color function and a transparent color preview function to the software.

Please find a way to add a variable flow volume; otherwise, the last layer will overflow too much.