Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 50.8x152.4mm in size.

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #14 (1.2mm) swap to Grey
At layer #19 (1.6mm) swap to White for the rest.