Spartaner (Gipsfigur)
Copyright Claim
Spartaner (Gipsfigur)
Boost
75
112
21
Print Profile(3)
0.2mm layer, 2 walls, 15% infill
Designer
5.4 h
1 plate
0.16mm layer, 2 Walls, 15% Gyroid Infill
7 h
1 plate
Finer Detail, Less Infill with Variable Layer Height. 0.16mm Layer, 2 Walls, 10% Gyroid Infill
6.2 h
1 plate
Boost
75
112
21
1
172
112
Released
Description
- Fülldichte 15%
- 1. Schicht 50 mm/sec.
- Füllung der 1. Schicht 80mm/sec.
- Stützen Baum mit 30 Schellenwinkel
- Randtyp nur Äussere
- Revopoint Range 3D Scanner
Comment & Rating (21)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
Danke für die klasse Datei. Molon labe 💪🏻
The designer has replied
0
Reply
danke dir für das herunterladen....
(Edited)1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Super rausgekommen Marmor
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 Walls, 15% Gyroid Infill
(Edited)
0
Reply
Print Profile
0.16mm layer, 2 Walls, 15% Gyroid Infill
Bed Adhesion Issue
The designer has replied
0
Reply
I think that a bed adhesion issue, is no fault of the profile. It is usually down to a dirty build plate. Perhaps you need to clean your build plate with hot soapy water using a dish detergent and maybe a wipe down with 99% I.P.A might help. No one else has reported bed adhesion issues as far as I know. If this doesn’t help maybe check your belts are tensioned correctly. 👍
(Edited)0
Reply
Replying to @Deploy
Sorry but i cleaned and used 3D Lac so maybe issue is matte PLA
0
Reply
Ah ok! That is surprising then. Especially if you used 3DLac as well. 🤷🏻♂️
0
Reply
Print Profile
0.16mm layer, 2 Walls, 15% Gyroid Infill
Printed in silk and it looks awesome 😎
0
Reply
Print Profile
0.16mm layer, 2 Walls, 15% Gyroid Infill
Excellent File. Printed in PETG Translucent Blue. It gave it an interesting astetic!
0
Reply
Print Profile
0.16mm layer, 2 Walls, 15% Gyroid Infill
A bit low detail for my liking, but is perfect for viewing mid-distance as it is fairly large
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
good quality, but too much infill.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Related Models
© 2024 MakerWorld