Hello guys this is the first model I decided to make. It is modeled after the Nintendo Gamecube to give a nice retro feel to your entrance way. Since I do not have an AMS I found it easier to print out the body of the model separately than the face to achieve a different color and better quality. The Bambu profile given is what worked for me, the face is printed at a .08 layer line height to achieve a smoother result and the peg that goes into the hole is scaled down already to 98%. If you decide to use the STL files, you are going to need to scale down the peg to 98% to fit. This model does require super glue to glue the face to the main body of the model.