About the model

The model is divided into several objects:

• front of the lightbox
• lightbox lid

In the 3MF file I used a negative part to make a hole for the cable. You can move it and scale it to your liking.

Colors:

I used leaf green, venom green, black and white colors.

Printing suggestions:

• Use slighty higher nozzle and bed temperature for first layer when printing the face of the lightbox to have fewer gaps between colors
• Print slower for better quality, set initial layer and initial layer infill to 50 mm/s, outer wall, inner wall and top surface to 100 mm/s
• Supports are not needed

Adding holes for cables

• You can easily add holes in the slicer
• Right-click on the objects and select Add negative part - cylinder
• Scale the cylinder to the diameter of your cable
• Place the holes (negative parts) where you want them to be
• Slice and print

Commercial Use

This model is only available for non-commercial use, you can print it for yourself or as a gift for others, but you may not sell or alter the model. If you are interested in obtaining a commercial license please visit my Patreon store: https://patreon.com/noordinaryleaf