Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 104.88x146.52mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.3mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.1
PLA BambuLab Matte Dark Blue Transmission Distance: 0.1
PLA Bambulab Basic Purple Basic Transmission Distance: 1.4
PLA BambuLab Basic Pink Transmission Distance: 5.8
PLA BambuLab Basic Orange Transmission Distance: 5.8
PLA BambuLab Basic Yellow Transmission Distance: 5.9
PLA BambuLab Basic Jade White Transmission Distance: 5.9
This print uses 7 unique filaments
Swap Instructions:
Start with Charcoal
At layer #13 (1.12mm) swap to Dark Blue
At layer #14 (1.2mm) swap to Purple Basic
At layer #16 (1.36mm) swap to Pink
At layer #18 (1.52mm) swap to Orange
At layer #21 (1.76mm) swap to Yellow
At layer #22 (1.84mm) swap to Jade White for the rest.