HUEFORGE PORSCHE RSR

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Silver Transmission Distance: 0.5

PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Jade White Transmission Distance: 4

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions: Start with Red

At layer #3 (0.32mm) swap to Silver
At layer #8 (0.72mm) swap to Black
At layer #17 (1.44mm) swap to Jade White for the rest.