Pistachio Bowl 2.5 by EPIQ3D

EPIQ3D

Household>Festivities

Print Profile(6)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

Single material - 0.2mm layer, 3 walls, 15% infill

Designer

8.4 h

3 plates

4.9(36)

Multi color - 0.2mm layer, 3 walls, 15% infill

Designer

20.3 h

3 plates

5.0(2)

For A1 mini - 0.2mm layer, 3 walls, 15% infill

8 h

4 plates

4.9(29)

Sinlge Material - 0.2mm layer, 3 walls, 12% infill

6.9 h

3 plates

5.0(2)

Click to see more

Open in Bambu Studio

Boost

448

925

115

116

915

630

Released

Description

Complete the collection with the other in the series.

Pistachio cup - Check it out here

Pistachio Bowl 2.5 PARTY EDITION - Check it out here

-------------------------------------------------------------------------

UPDATE 06/19-2024:

- Multi colered version have been added.

(The pattern is flush with the body on the multi colered version)

- New design on the lid, so it snaps better.

- The DISCONTINUED print profile has been removed,

so to be sure that top and lid fits together, you will have to print both.

-------------------------------------------------------------------------

— No support needed —

(Well, a little bit for the sweepermount in the top, but thats all)

Updated version of the Pistachio Bowl 2.0 (Not a remix, entirely original)

So whats new in the updated version?

- Slightly bigger

- More room for empty shells

- Bottom and top easily snaps together, and can still rotate freely.

- Lid snaps on to the top (if you dont eat them all)

- A sweeper is added below the shoot, so it is easier to disperse

the empty shells when the bottom begins to fill up.

- Updated pattern design

(The sweeper has to be glued to the bottom - Be sure to align edges.

Testfit before glue is added)

Original text below (From Pistachio Bowl 2.0

---------------------------------------------------------------------------------------------------

Unique stylish design, crafted to be used, but also seen.

2 in 1 function.

So, how does it work, whats so speciel.

Well.. not much ;) but the idea is, that when you dispose of the empty shells, you put them in the hole (nothing new there).

BUT- when the spot beneath gets overcrowded of sheels, dont rattel the bowl - just turn the top to a new spot.

If shelled nuts is not for you, then the bottom part can also be used as a standalone bowl

And, its pretty …

Holds about 250 grams

-------------------------------------------------------------------------------------------------

This 3D model is registered as a "Standard Digital File License"

But feel free to share with your freinds or family.

Comment & Rating (115)

@user_1367737782

Print Profile

Single material - 0.2mm layer, 3 walls, 15% infill

super useful bowl especially now ihr the European football championship 👌🏻👌🏻👌🏻 came out good without big issues. got some optical issues, bit acceptable. don’t know how to avoid those lines on the second picture

@Mira

if you dont mind longer prints then you can try to enable fuzzy skin in the BambuSlicer. It will create rough rustic surface (you can set up the roughness). This will effectively mask any imperfections like you mention. But the print will be considerably slower (2-3 times). https://wiki.bambulab.com/en/software/bambu-studio/parameter/fuzzy-skin#:~:text=The%20fuzzy%20skin%20effect%20is,the%20holes%20of%20the%20model. Or you can try to better decouple your printer from outside resonances. By putting it on heavy stone-slab and then putting this slab on foam. https://www.cnckitchen.com/blog/reduce-your-3d-printing-noise-with-a-concrete-paver Happy printing.

(Edited)

@user_1367737782

thanks a lot! will try

@supert3d

Print Profile

Discontinued - 0.2mm layer, 3 walls, 15% infill

Printed in Bambu Matte Latte Brown. Got a bit of bed curl on the sweeper bit so I added a brim to that and a little bit of support. Might just be a prob with that filament as I got some stringing (need to dry it) Love this print, great design!

The designer has replied

@EPIQ3D

looks nice.. have you cleaned your build plate with IPA? maybe its to greasy.

@supert3d

Replying to @EPIQ3D :

Yeah true, I've been a bit lazy with that. Second print worked perfectly, just waiting for the glue to dry 😆

@user_3326232525

Boosted

Came out really nice. Love this desing - usefull and beautiful at the same time.

@jonogunn

Boosted

Print Profile

Discontinued - 0.2mm layer, 3 walls, 15% infill

bambu PLA. love it

@xSpotix

Boosted

Print Profile

Single material - 0.2mm layer, 3 walls, 15% infill

richtig gut

@taylo_r

Print Profile

Single material - 0.2mm layer, 3 walls, 15% infill

amazing print, very easy to print and looks good. a bit of stringing but nothing that cant be cleaned up

@mr.deadius

Print Profile

Single material - 0.2mm layer, 3 walls, 15% infill

Simply wonderful!! I scaled it to 87%, 14 cm in diameter, because the original seems very big to me and it turned out perfect. I printed one of them with the colors of the Spanish team, to snack on while watching the Euro Cup matches, for a gift. Thanks for the design!!

@Nescrich

Print Profile

Single material - 0.2mm layer, 3 walls, 15% infill

Easy print and looks fantastic

@Nescrich

My wife loves pistachios and now is in love with her new bowl!

@fmurodov

didn’t use sweeper, still great without it. printed for my wife, so now she understand why we got a printer

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.