Search models, users, collections, and posts
Customizable containers
IP Report
Print Profile(4)
80x50x40mm, two rooms, 0.12mm layer, 2 walls, 15% infill
Designer
2 h
1 plate
100x80x20mm, two rooms, 0.12mm layer, 2 walls, 15% infill
Designer
1.7 h
1 plate
80x50x40mm, single, 0.12mm layer, 2 walls, 15% infill
Designer
1.6 h
1 plate
50x40x40mm, single, 0.12mm layer, 2 walls, 15% infill
Designer
1.1 h
1 plate
Open in Bambu Studio
Boost
135
322
23
16
302
147
Released
Description
These are simple but useful small containers, designed to hold small things and with the rounded corners in the bottom to make it easier to pull out small things like washers and screws.
The wall thickness has been tweaked to print nicely with a 0.4mm nozzle, making a sturdy box, though that can also be changed using the customizer if need be.
There is two types, one with a single compartment inside, and one with a divider in the middle giving you two equal sized rooms.
I have used these in a wooden tool caddy, where the dimensions have been adjusted to fit the room in the caddy, having a little extra space around them to make it easy to get them in and out, when using them (around 0.5mm on all sides works well).
License
This user content is licensed under a
Creative Commons Attribution-Share Alike
Comment & Rating (23)