Simons Cat Keyring | Double Sided | Two Parts

Simple 2d keyring of Simons Cat, in 2 colours

This version is in 2 parts, the idea is that instead of ironing one side (which never turns out as good as face down prints) you can print both parts face down to get the nice textured bed texture on both sides.

They should just pop together, they do hold together but you will need a little glue to hold them together permanently, I just use generic super glue on PLA and PETG and it seems to work well.

The infill type and percentage can be changed by modifying the Front-White-Infill.stl object in object mode, or you can simply delete that object for a more solid infill.

The original one sided version can be found here: