一个简单实用的乌龟晒台,高度为10cm,可用于不超过10公分水深。中部镂空方便乌龟躲避和游玩,需要使用一些配重防止漂浮,建议用石头。
我使用0.2mm层高打印,填充为20%,侧卧放置打印,无需支撑。
A simple and practical turtle terrace with a height of 10 cm and can be used for water depths of no more than 10 cm. The hollow in the middle is convenient for the turtle to dodge and play, and some counterweights are needed to prevent floating, and stones are recommended.
I printed with a 0.2mm layer height with 20% filling, lying on my side and printing without support.