Patrick Star pen holder Storage Decoration派大星笔筒收纳盒

Please be sure to comply with your local laws and do not use the model for inappropriate purposes.This is a cosplay prop.

Thank you to everyone who provided me with the photos.

No assembly instructions can be released at this time. Could not pass review.

At the request of netizens, I made this Patrick Star Pen Holder/Storage Box, which can be printed without supports.
Use black filament for the eyes. If you print the model smaller, put the negative part in the eye to ensure that the filament is used. If you print larger, print the corresponding size black cylinder or add the part and then add the negative part.

In order to ensure that the shrinkage of different materials and the model scaling can be assembled normally, I used a slightly larger tolerance. You may need to use glue between the parts. You can also adjust the size compensation in the slicing software yourself.

应网友要求，我制作了这款派大星笔筒/收纳盒，无支撑打印。
眼睛使用黑色耗材。如果你缩小模型打印，请将负零件放入眼睛处，以确保使用耗材。如果你放大打印，请打印相应尺寸的黑色圆柱体或者添加零件再添加负零件。

为了确保不同材料的收缩性、模型缩放都能正常组装，我使用了略大的公差，零件之间可能需要使用胶水，你也可以自行再切片软件中调整尺寸补偿。

The Mickey pen holder model in the picture below.下图米奇笔筒模型：

https://makerworld.com/zh/models/485171#profileId-397613

Please be sure to comply with your local laws and do not use the model for inappropriate purposes.

Under the new reward mechanism, please "Boost Me" more, give me five-star praise, and welcome everyone to share and show off their finished works, so that I can get more points. Your support is my biggest motivation to continue designing more models.

Reminder:

• Different filaments may cause the parts to be too loose or too tight, and may also make some supports difficult to remove.
• The position of the model printing takes into account strength and appearance (for example: vertical surfaces have better fineness and better representation of patterns and text; horizontal printing axes sacrifice accuracy but have better strength).
• Please keep the printing plate clean. All models are confirmed to be printable. It's not my fault if it turns into spaghetti.
• It is recommended that you equip yourself with a heat gun. Slightly heating the parts can solve many minor problems and can also compensate for minor part tolerances.