IKEA Skadis/ Skådis Pliers Holder - T Clips
Copyright Claim
IKEA Skadis/ Skådis Pliers Holder - T Clips
Boost
50
132
19
Print Profile(1)
0.16mm layer, 2 walls, 15% infill
Designer
1.1 h
1 plate
Boost
50
132
19
1
198
101
Released
Description
Pliers holder for IKEA Skadis boards. Mounted using the T-Clip System by Line Arc Line. Can also use T-Clips mini by capze or Low Profile T-Clips by tchoupshop to fit flush. The clips come in two versions - one for black/white Skadis boards, and one for unpainted ones. (not included here, please download from the creator).
I ended up using only 2 clips as the pliers were not too heavy, but you might want to go for the 3rd depending on the load.
Comment & Rating (19)
All
Print Profile
0.16mm layer, 2 walls, 15% infill
Druck war sauber.
Für mich zumindest ist das Teil weniger nützlich als gedacht
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
The edges of the print started to lift. I recommend adding supports or modifying the model to have a flat base. Otherwise, the print looks great!
(Edited)The designer has replied
0
Reply
The model sits flat on the print plate and does not need any support since it has no overhanging parts. The lifting can not be caused by the print profile. Make sure you are using the right plates and bed temp. Also, as noted, you should use your print settings which work for the filament you choose to use.
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Good strong design.
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
1
Reply
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRemixes (1)
Related Models
© 2024 MakerWorld