Soldering Tool Holder Flexible Arms helping hands by kisik20

kisik20

Hobby & DIY>Electronics

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.12mm layer, 2 walls, 20% infill

Designer

14.4 h

1 plate

4.2(26)

0.2mm layer, 3 walls, 20% infill

Designer

7.5 h

1 plate

4.3(22)

A1 MINI - 0.2mm layer, 2 walls, 15% infill

4.9 h

1 plate

4.3(14)

Boost

1277

2185

117

113

2.1 k

641

Released

Description

New info:

some including me wanted to create a smoke absorber for soldering, here is a new project:

https://makerworld.com/en/models/495413

ENJOY

INFO:
Hi guys, i have news for you. I made new crocodile clip. Clip is smaller and bether for work. Enjoy
Clip is here:

https://makerworld.com/en/models/492860

Soldering Tool Holder. Adjust the support pipe arms, regulate the whole project. When 2/4 arms needed, only adjust the base arms, very convenient to change the height, angle of gripping without tedious and stiff to adjust arms one by one, or put items off and put on to change the orientation. More freely than traditional single helping hands arms and protect your precise item.

1.The three to six hand tool quickens soldering,electronics, and DIY projects allowing you to finish your work faster than ever before! Our Third Hand makes positioning a breeze with

2.base save space,Easy to carry,Free hands

3.alligator clip tips for 360 degree rotation for easy operation and work

4.Super compact design for an ultra portable third hand tool

5.Very suitable for the complex difficulty welding such as model airplane repair, easy to clamp the solder and operation.

helping

soldering

soldering accessories

Comment & Rating (117)

@salvadorkematen

Print Profile

0.2mm layer, 3 walls, 20% infill

Sehr hilfreich, ist auch einfach zu Drucken. Hab ein bisschen mit dem Farben gespielt. Kann auch jederzeit erweitert werden auf 6 Arme “Top“ Vielen Dank! Lg Robert

The designer has replied

@kisik20

nice color :)

(Edited)

@codemania

Print Profile

0.2mm layer, 3 walls, 20% infill

Good.I wonder why there are no people supporting this. The print effect is perfect, and the tool assembled is very useful. The design is so clever. I want to add some instructions: Each arm contains twenty four beads, And you can print one or more extra beads for possible broke in assembling process .

@lingjia92

Print Profile

0.2mm layer, 3 walls, 20% infill

success rate very low

The designer has replied

@wateryt84

You need to use glue. I use 3DLAC, it works perfect.

(Edited)

@kisik20

poor adhesion, use 3dlac spray

@lingjia92

Replying to @wateryt84 :

I did

@flrnsmp

Boosted

Print Profile

A1 MINI - 0.2mm layer, 2 walls, 15% infill

came out really nice. I use it for work with Arduinos. some of the connections break easily and ist not that sturdy. But gets the job done.

@user_831025866

Boosted

Print Profile

A1 MINI - 0.2mm layer, 2 walls, 15% infill

Top Druck, genau das was man beim löten für FPV braucht. Hatte nur weißes Petg

@Madsie12345

Boosted

Print Profile

0.2mm layer, 3 walls, 20% infill

very good print everything works perfect

(Edited)

@RibbyMoo

Genuinely having the worst luck printing the arm pieces, the toolhead always comes in and knocks the pieces off and have less than a 50% success rate. 4 failed plates so far, adding brims, supports, changing speed, print order had no effect

The designer has replied

@kisik20

hi, something is wrong with your printer or settings, printing is completely problem-free and tested. Unfortunately I don't know how to help.

@RibbyMoo

Replying to @kisik20 :

Was able to print most of them by switching to a smooth plate and using glue stick, still not 100% (just a few failed segments) but much better than with the textured plate. It's just the nature of printing lots of small thin tall structures so not surprised, just glad I finally figured it out

@Horror_Roach

Replying to @RibbyMoo :

i had one or two fail on my x1c but i think it's because the textured PEI plate was greasy in those spots

@LilRed

Print Profile

0.12mm layer, 2 walls, 20% infill

great design and prints easily with pla

@pfcwalker11

Boosted

Print Profile

0.2mm layer, 3 walls, 20% infill

printed fantastically. rainbow silk from sunlu

@Str8ghtline

perfect!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models