Sometimes, the desktop can not touch the wall perfectly, it will cause the desk unstable especially when use this desk for a 3D printer. The vibration will affect the printing qualitly.

So I made this wall and desktop holder to fix it. You do not need to drill any holes on the wall or the desktop. You can easily remove this holder once you do not need it.

The holder can be used for the desktop's thickness less than 3cm. There're also two plastic screws to grip the holder to the desktop with the thickness less than 3cm. I think 3cm can match most of the desktop (etc. IKEA's desktop). If your desktop's thickness is thicker than 3cm, please let me know, I will try to make a 5cm type.

You can use an adjustment block to adjust the gap distance between the desktop and wall. I have made two blocks with different thickness. you can simply amend the thickness of the fixture cube for your own situation.

有的时候，我们的书桌桌面无法完美的靠近墙面，这可能会导致桌子站不稳， 特别是当这张桌子上有一个3D打印机，震动会影响打印质量。

因此我制作了这个桌面和墙面的固定器。你无需在墙上或者桌面上打任何孔。当你不需要的时候，你可以轻易的移除它。

这个固定器可以用于厚度小于3cm的桌面。大部分的桌面小于这个厚度（比如宜家的桌面）。如果你的桌面小于3cm厚，里面的两个塑料螺丝可以让固定器与桌面夹紧。如果你的桌面厚度大于3cm，请让我知道，我会考虑做一个适用于5cm厚度桌面的版本。

你可以使用一个调整方块来调整桌面与墙面的距离。我做了两个不同厚度的方块。你可以简单的修改固定方块的厚度来适应你的实际情况。