Another version of Hot Wheels logo, with sharp edges.

Negative parts added for magnets dim. 8x2 mm. You can move them around and scale them to your liking.

The STL file can be divided into parts for easier coloring.

Printing on textured plate:

• Use slightly higher nozzle and bed temperature for the first layer when printing to have fewer gaps between colors
• Print slower for better quality, set initial layer and initial layer infill to 50 mm/s, outer wall, inner wall and top surface to 100 mm/s

Printing on smooth plate:

• Set initial layer height at 0.1 mm and initial layer width 0.3 mm
• Use slightly higher nozzle and bed temperature for the first layer when printing to have fewer gaps between colors
• Print slower for better quality, set initial layer and initial layer infill to 20 mm/s, outer wall, inner wall and top surface to 100 mm/s

Adding holes for magnets

• You can easily add holes for magnets in the slicer
• Right-click on the objects and select Add negative part - cylinder
• Scale the cylinder to the size of your magnets, make it slightly bigger so the magnet can fit in
• Place the holes (negative parts) where you want to position the magnets
• Slice and print

Commercial Use

This model is only available for non-commercial use, you can print it for yourself or as a gift for others, but you may not sell or alter the model. If you are interested in obtaining a commercial license please visit my Patreon store: https://patreon.com/noordinaryleaf