What is most essential for a guy unexpectedly dragged out of hotel room by his missus saying „We’re goin to the beach, now!”? Well, try to hide the content of a freshly opened can and take it with you! But how?

I got the solution for you gents! The funny 500ml can sleeve should convince her and police (at least if their intelligence is as the jokes says) that you don’t carry alcohol into a public place! Well… let’s be honest, probably not, but it’s always worth a try! ;)

How to print the model?

Model was created with 0.2mm layer height and 0.4mm nozzle in mind. Don’t go with bigger nozzles or higher layers. You will loose details and potentially make this sleeve too tight for a can.

Print it with PETG for high temperature resistance if you want to use it outside. PLA is absolutely fine too… just change your cans often to provide some cooling ;)

Option 1 – Fast print, no colors

Download model described as above. It has only outside face.

In Bambu Studio go to „Strength” tab. Set „wall loops” to 3. It has to be 3 to get correct dimension for the can. Set „top shell layers” to ZERO. Set „bottom shell layers” to 8 or 10 (to get 1.6 or 2.0 mm bottom part of the sleeve). Set the „sparse infill density” to ZERO. This way only thing printed will be bottom and 3 walls. Fast and easy :)

Option 2 – You got plenty of time, unlimited access to free filament and you are little bit crazy ;)

AMS with coloring option!

Download „For AMS coloring” file. This is full model with outside and inside face. Currently Bambu Studio is not able to color model prepared as in Option 1.

Color your model as you want. There can be hundreds combinations!!!

Be shocked by the printing time. Be shocked by the filament wasted. Be shocked by amount of filament changes.

You don’t want to do this!!! :)

OK, now I’m waiting for some „Hold my beer” guy….. :D

Gents and Ladies! If you like the model and you want to give it thumbs up, please also consider downloading it. It cost you just one additional click and it’s very important to me. Thank you!

Thats it!

As always – happy printing :)