[单车3D打印配件分享] 自行车快拆储物盒
一种自行车快速释放装置(水壶或储物罐)
本人车架三角区位置的安装孔位被大杯水壶和车锁占用,只能使用下管位的安装孔。下管水壶安装好后,由于受到孔位,水壶架结构和轮距的影响,拿取水壶或储物罐非常不方便,需要转动车把。而且骑行中如果脱出水壶架,还会与轮胎磨损,造成水壶或储物罐的损坏。因此设计了这个快速释放装置,用于水壶或储物罐上,已解决前面的问题。
弹簧我使用的是圆珠笔里面的弹簧,可以尝试使用其它弹簧,圆珠笔弹簧弹力不足,锁上后不明显。
弹簧宽度约为:4.8mm
弹簧压缩后最大长度大约为:9.5mm
弹簧安装后长度大约为:13.4mm
文章链接:
https://tl8517.com/bicycle-quick-release-device/
视频链接:
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.