A few days ago, I took my 3-year-old son to a café to grab a coffee together. Well, I had the coffee while he played with his toy cars...

The barista was super nice and showed him how to make a traditional Italian espresso.
 

Later that evening, when we got home, my son wanted to "make" me a coffee too, but our cups are ceramic and I figured they'd last about two seconds in his hands. So, I decided to design and print these toy cups that look a lot like the ones we use at home but are meant to be printed without supports.

I also designed a little tray for him to put the cups on while he "makes" coffee and serves it like a real waiter.

The result is what you see in the photo. 
What you can’t see is my son serving me dozens of coffees (thankfully, they were just pretend)!

Printing Instructions

This model is super easy to print and doesn't need any supports or post-processing.

You can print it with a 0.4mm nozzle and a layer height of 0.2mm. 

Material: PLA 
Layer Height: 0.2mm 
Supports: NO
 

Are other versions available?

If you have any suggestions to improve it, leave a comment. I'll do my best to make this project even better!

If you like this model and want to support my work, you can give me a "boost" 🚀 or buy me a [Ko-Fi]. 
Your contribution, no matter how small, helps me buy new spools of filament for creating my prototypes. ;)

Thanks in advance! :)

Commercial license you can get here: https://ko-fi.com/miziomon/tiers