Inspired by the talented design by jootoole (https://www.thingiverse.com/thing:5214891).

Made specifed for Delonghi EC680/685/885, or other 51mm portafilters (not tested).

• 2 slots for portafilter. The 1st mount slot for stock portafilter is slightly wider than the 2nd slot.
• 2 slots for tamper/distributing tools that is 51mm in diameter
• a slot for needle distributing tool (18mm diameter)
• a slot for brush tool

The sizes are made out of tools of what I own.

There is another separate wall mount for the buskets, 3 slots in total.

Mounting method: specified slot for 15mm wide / 1mm thick double-sided tape

Print guide:

both printed vertically

• Main shelf: no support needed; 3-4 walls recommended; infill at your wish
• Busket shelf: support needed for the numbers; apply brims if needed