NEW! 3D PRINTED LED STRIPE QUICK 2 PIN CONNECTOR by Mr.Rod

Mr.Rod

Hobby & DIY>Electronics

GIF

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.08mm layer, 2 walls, 15% infill

Designer

23 min

1 plate

4.7(10)

inside part scaled down to 95%, 0.08mm,2 walls, 15% infill

31 min

1 plate

5.0(1)

Boost

501

807

459

139

Released

Description

I´m proud to present to you a revolution when it comes to a product of these specs, this is not something new as an invention, but is something that will save the whole DIY, 3D Printing scene community lot of cost and time effectiveness when it comes to start new projects, prototypes or even working on existing ones, and this is only counting with these LED Stripe connectors, there´s even yet more to come, with even more revolutionary electro-mechanical projects.

THANKS SO MUCH FOR ALL THE SUPPORT AND FEEDBACK ____________ Mr.Rod

REMEMBER FROM THIS PAGE YOU CAN ONLY DOWNLOAD AND PRINT THE 2PIN LED STRIPE STRAIGHT LONG CONNECTOR, TO GET SOME OF THE OTHER VERSIONS SHOWCASED IN THIS PAGE TAKE A LOOK TO SOME OF THE KITS BUNDLES OF LED STRIPE CONNECTORS IN MY PATREON BIO.

REMEMBER YOU CAN GET THIS LED STRIPE CONNECTORS KITS AND THE PRODUCTS THAT ARE YET TO COME BY 2 WAYS:

BUYINGH THE WHOLE PACKS OFFERED AT PATREON SHOP (Not reccomended)
BY BECOMING A MEMBERSHIP OF MY PATREON PAGE BY PAYING A MONTHLY SUSCRIPTION (That you can cancel whenever you want). LINK:

Patreon Membership and products link: https://patreon.com/DIYElectricalQuickPlugs?utm_medium=unknown&utm_source=join_link&utm_campaign=creatorshare_creator&utm_content=copyLink

Instructions, Safety and Assembly Guide Manual Included for this project.

Documentation (1)

Assembly Guide (1)

LED STRIPE CONNECTORS_9559b554-cac0-455e-9df1-390f2cf63a2d.pdf

Comment & Rating (23)

@redt8tr

Print Profile

0.08mm layer, 2 walls, 15% infill

Works great! Thank you

The designer has replied

@Mr.Rod

Nice! Enjoy!!

@OPA10

Boosted

Print Profile

0.08mm layer, 2 walls, 15% infill

Works

The designer has replied

@Mr.Rod

Nice Mate!

@ChrisG66

Printed Perfect Didnt require any supports or a brim

The designer has replied

@Mr.Rod

Awesome Mate! Yeah, all the desgined led connectors dont’t require thankfully any supports 💪🏼

@Quantum.Grower

Boosted

Print Profile

0.08mm layer, 2 walls, 15% infill

Perfect print profile. No brim or supports needed. Do you think these will work with PETG? I don't have any ABS or ASA.

The designer has replied

@Mr.Rod

Hey Mate! Well… when inserting the internal part into the outside cover depending on the cables you are using (how thick they are) you’ll need to make more or less force so mabe it can bend? I don’t know mate It’s a fast and low consumption print so if you have that filament it would be worth trying, If you try it let me know how it looks like at the end and how it performs :)

@MasterBuilder

Print Profile

0.08mm layer, 2 walls, 15% infill

@user_1895409113

sorry I'm confused, is the point of this, to be able to turn a unusable led strip that's been cut, back into a usable piece? so I can get one led strip,cut it into 50 pieces, then attach 50 of these and they all power on?

The designer has replied

@Mr.Rod

Het Mate! Depends on what bundle / pack we’re talking about. From here, from makerworld, this connector that you can download, only serves to power from the start of an Led stripe with 2 pins, if you connect power cables from the same source in parallel you can connect as much led stripes as you want, but each one independently with it’s own connector and its own power supply cables. but with the possibility of coming from the same power supply. But from the ultimate bundle kit offered at patreon you can not only connect an led stripe from power supply, you can even Inter-connect various led stripes in serial, letting all of them being powered by the same powersupply.

@user_1895409113

do you have a video or recommend one on how do this? just get any 5v power supply?

@SmartDiyLab

Boosted

A++

The designer has replied

@Mr.Rod

Thanks so much :)

@DynomUlteavil

Print Profile

0.08mm layer, 2 walls, 15% infill

Pretty nice

The designer has replied

@Mr.Rod

Thanks Mate! :)

@salvatorepascuz

Print Profile

0.08mm layer, 2 walls, 15% infill

Other Issues

The designer has replied

@Mr.Rod

Hey! Im here to help, if there’s anything that can be improved or solved by changing some print profile parameters let me know about it! :)

@ChrisG66

Print Profile

0.08mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.