========================================english readme===================================

【 Model Description 】

I have been addicted to practicing slingshots recently, and what's very uncomfortable is that the leather target I purchased is easily damaged and the price is not cheap. So after multiple printing and testing, I finally released this slingshot target, which is very durable and cost-effective. If you are also a slingshot enthusiast, perhaps this slingshot bull's-eye is also suitable for you. I have designed two sizes of bullseye, 30MM and 35MM, and each size has two styles of bullseye. Personally, I recommend using style 1 bullseye.

【 Printing Instructions 】

Attention: The slingshot target model must be printed using TPU consumable threads. Other consumable threads such as PLA/PETG/ABS cannot be printed. Non TPU consumable printed target hearts may break with just one bullet. Therefore, please make sure to use TPU consumables for printing.

【 Assembly Instructions 】

Assembly is very simple, you only need to prepare 2 M3 * 10mm screws and nuts!

【 Strike demonstration 】

URL：https://youtube.com/shorts/bbsUNoCF7oA?si=CJkC41B1xgzBPAMK

========================================chinese readme===================================

【模型说明】

最近练习弹弓上瘾了，非常让人难受的是，购买的皮革靶心很容易被打坏，并且价格还不便宜。于是我经过多次的打印和测试，最终发布了这个弹弓靶心，它非常的耐打，且造价低廉。如果你也是一名弹弓爱好者，或许这个弹弓靶心也适合你。我设计了30MM和35MM两种规格的靶心，并且每种规格有2种风格的靶心，我个人推荐使用风格1的靶心。

【打印说明】

注意 ：该弹弓靶心模型必须使用TPU耗材丝进行打印，其它的PLA/PETG/ABS等耗材丝均不可以打印，非TPU耗材打印的靶心 ，可能一发子弹就能它打烂。因此请务必使用TPU耗材丝进行打印。

【装配说明】

装配很简单，您只需要准备2颗M3*10MM左右的螺丝和螺母即可！

【击打演示】

URL：https://youtube.com/shorts/bbsUNoCF7oA?si=CJkC41B1xgzBPAMK