Simpsons Rock
Simpsons Rock
Print Profile(1)
Description
Os dejo una personalización de los Simpsons V-Rock echa con Hueforge.
Instrucciones:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x143.6mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 2.7mm
Filaments Used:
PLA Sakata 870 Black Transmission Distance: 0.3
PLA Sakata 870 Plata Transmission Distance: 1.8
PLA Sakata 870 White Transmission Distance: 6
This print uses 3 unique filaments
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Plata
At layer #22 (1.84mm) swap to White for the rest.
Espero que os guste!!
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
