This is a PET bottle cutter.
It uses 2 608zz ball bearings to cut the PET bottles. The bearings must be sharpened with an angle grinder to be able to cut.
Full Bom
2 M8x50 hex screws{holds the bearings
1 M8x30 hex screw with a cut on it which serves as a guide. with this screw you can adjust the width of the strip that needed to be cut.
4 M8nuts
2 M8 nylon nuts
3 M8 washers
1 M5 nut
1 M5 threaded rod which serves as a botlle holder
4 M4x30 allen screws which fix the cutter onto a piece of wood, a table and so on
This cutter is part of an entire machine. You cand find it on etsy.
https://www.etsy.com/listing/1501105570/3d-filament-making-machine-from-pet
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.