为了能够方便自己单独给渔轮上线、换线、调换线的前后. 虽然网上已经有成品了.

我使用了2种材质打印的, 分别为 PETG 和 TPU. 主体零件为 PETG 材质, TPU打印了2个减震垫.

出现很多种颜色的PETG是因为我最近在使用、测试不同厂家的耗材.

⚠️额外需要2个 M2.5 * 10 的螺丝, 平头圆头都无所谓, 一个用来固定主轴, 一个用来固定握丸和大齿.

To make it easier to spool, replace, and adjust the line on my fishing reel by myself, although there are already finished products available online.

I used two types of materials for printing: PETG and TPU. The main parts are made of PETG, and I printed two shock absorber pads with TPU.

The variety of PETG colors is because I have been using and testing filaments from different manufacturers recently.

⚠️Additionally, 2 M2.5 x 10 screws are needed, either flat head or round head is fine. One is used to secure the main shaft, and the other is used to secure the handle knob and the main gear.

ps: 通过转动主齿轮, 可以快速的将轮子上的线重新缠绕回线盘上.

By turning the main gear, the line on the reel can be quickly rewound back onto the spool.

ps: 通过调整主轴泄力调节螺丝, 来调整出线的力度, 可以使得上线更加紧密. (图上我使用的是鲈钓专用的4编PE线, 所以看起来缝隙很大.)

By adjusting the spindle drag adjustment screw, the tension of the line can be adjusted, allowing for a tighter winding. (In the picture, I used a specialized 4-strand PE line for bass fishing, which is why the gaps appear large.)

ps: 2颗 M2.5 * 10 的螺丝( 2 M2.5 x 10 screws )