Model
Do NOT adjust the size in your slicer!! The layers will not come out right.
Do not change the size, this will cause errors in color change compromising the entire print.
Use my print profile or you will not get the desired results.
It can be printed safely without AMS and on any printer.
I hope you like it, I hope you like it, if you want to support me leave a like and vote five stars thank you!
Nozzle: 0.4
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 180x180mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
PLA BambuLab Basic Red Transmission Distance: 4
This print uses 5 unique filaments
Swap Instructions:
Start with Charcoal
At layer #6 (0.56mm) swap to Ice Blue
At layer #9 (0.8mm) swap to Yellow
At layer #11 (0.96mm) swap to Ivory White
At layer #15 (1.28mm) swap to Charcoal
At layer #16 (1.36mm) swap to Red
At layer #21 (1.76mm) swap to Ivory White for the rest.