感谢开源的月球灯模型

根据这个模型我设计出了一个简单的月球灯底座。

我用桥接做了模型优化，不需要支撑。打印出来后拿小刀把薄片刮掉就行。

Type-C供电，可以边充电边亮灯

2500mAh电池，续航大概20-30h

金属触摸开关，三挡调节

为了确保打印出来就能安装，我在这个文件里面附上了月球的模型。

Maker's Supply里面缺少我需要的零件，所以我在这里列出需要额外购买的其它零件和购买链接，链接仅供参考：

1.滚花螺母：M3*5*4.2：1个，用于固定灯座的底板 https://m.tb.cn/h.gVqRTVr1sl0uHKc?tk=Nx0FWxpbTzC

2.M3*6平头螺丝：1个，用于固定灯座的底板 https://m.tb.cn/h.gVq7DIOEytMkGnF?tk=sTjbWxpYVbZ

3.LED灯珠：3.7-5V，1W：1个 https://m.tb.cn/h.g413zaRZ3tgSLWg?tk=oWqiWxp0ZRj

4.金属触控按钮（10mm）：买的铜镜装饰盖，便宜好看，只要尺寸合适，你也可以自己挑选合适的金属帽。
https://m.tb.cn/h.gVQlNaaHyImEHz4?tk=4oHqWx8kRmo 或者 https://m.tb.cn/h.gVES9qCIsrDUQHn?tk=Z71SWx8kyHc

5.电池：3.7V聚合物锂电池 50*50*6.5mm 2500mAh https://m.tb.cn/h.gVE97jLDgZx7AIM?tk=YVHzWx8p91y
6.台灯电路板：https://m.tb.cn/h.gVYgWp6VCGw9pUQ?tk=dwTnWx881bj

7.m2*8自攻螺丝：2个，用于固定电路板 https://m.tb.cn/h.gVEQ5fXsmNGEp9d?tk=tAbgWx8ovXC

————————————————————————————

Thanks to the open source moon lamp model.

According to this model I designed a simple moon lamp base.

The model didn't need support. Just take a knife and scrape the flake off when you print it.

Type-C power supply, you can charge and light up the lamp at the same time.

2500mAh battery, battery life of about 20-30h.

Metallic touch switch, 3 levels of adjustment.

In order to make sure that it can be installed as soon as it is printed out, I have attached a model of the moon inside this file.

Maker's Supply doesn't have the parts needed for this model in it, so I'm listing the other parts that need to be purchased additionally and the links to buy them here, the links are for reference only:（Please forgive me for being lazy, I used the translator to translate the English directly, it may not be accurate lol）

1. Knurled nut: M3*5*4.2: 1pc, used to fix the base plate of the lamp holder https://m.tb.cn/h.gVqRTVr1sl0uHKc?tk=Nx0FWxpbTzC

2.M3*6 flat head screw: 1pc, used to fix the base plate of the lamp holder https://m.tb.cn/h.gVq7DIOEytMkGnF?tk=sTjbWxpYVbZ

3.LED beads: 3.7-5V, 1W: 1pc https://m.tb.cn/h.g413zaRZ3tgSLWg?tk=oWqiWxp0ZRj

4.Metal touch button (10mm): buy the brass mirror decorative cap, cheap and good looking, as long as the size is right, you can also pick the right metal cap by yourself.
https://m.tb.cn/h.gVQlNaaHyImEHz4?tk=4oHqWx8kRmo or https://m.tb.cn/h.gVES9qCIsrDUQHn?tk=Z71SWx8kyHc

5. Battery: 3.7V polymer lithium battery 50*50*6.5mm 2500mAh https://m.tb.cn/h.gVE97jLDgZx7AIM?tk=YVHzWx8p91y
6. Desk lamp circuit board: https://m.tb.cn/h.gVYgWp6VCGw9pUQ?tk=dwTnWx881bj

7.m2*8 self-tapping screws: 2pcs for fixing the circuit board https://m.tb.cn/h.gVEQ5fXsmNGEp9d?tk=tAbgWx8ovXC