Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 116.71x185.99mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA BambuLab Basic Green Transmission Distance: 2
    PLA BambuLab Basic Gray Transmission Distance: 2
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #16 (1.36mm) swap to Blue Gray
    At layer #19 (1.6mm) swap to Green
    At layer #21 (1.76mm) swap to Gray

Border Only Colors from here until the end.
    At layer #26 (2.16mm) swap to Jade White for the rest.
 

paint some parts with acrylic marker.