Shelf support
Print Profile(1)
Description
I needed to reinforce the current shelf, I designed a pair of struts. First, I attached the "Supports" part with wood screws (3 mm diameter), then I put "Fillers" inside (it is not necessary to glue, but you can) and finally I finished the hole in the front part with a "Plug". Most of the holes are vertical, but two are slanted due to poorer access to the hole. Possibly, it will be necessary to drill the hole for plug first with a 7 mm diameter drill bit due to the subsidence of the layers under the supports.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (16)