Lightsaber Keychain (Retractable)
Copyright Claim
Lightsaber Keychain (Retractable)
Boost
860
1199
218
Print Profile(3)
0.16mm layer, 2 walls, 15% infill
Designer
1.3 h
2 plates
0.16mm layer (Optimal), 2 walls, 0% infill
1.2 h
1 plate
0.16mm layer, 2 walls, 15% infill
8 min
1 plate
Boost
860
1199
218
123
1.4 k
847
Released
Description
RETRACTABLE LIGHTSABER KEYCHAIN
NO STRUCTURE required!
EASY ASSEMBLY!
BOTTOM OF THE HILT CAN BE UNSCREWD to allow the blade to be removed and replaced.
The lightsaber blade retracts out when swung through the air.
KEYCHAIN RING required
BRIM needed for printing Blade
This is a replica of Obi-Wan Kenobi's lightsaber. Please do support by downloading and trying the model out. This was not an easy project due to the size of the print. Smaller prints tend to fail especially when it requires movement.
Material used:
(Feel free to try other materials)
| Grey | PolyTerra PLA |
| Black | Basic PLA |
| Gold | Basic PLA |
| Blue | PolyTerra PLA |
Comment & Rating (218)
All
Boosted
Print Profile
0.16mm layer, 2 walls, 15% infill
awesome!
The designer has replied
2
Reply
Nice😁😁
0
Reply
Boosted
Profile worked perfect, can't believe how easy it was. well done.
0
Reply
Boosted
Love this Print. Been trying to do the blade in glow in the dark PLA but the small end piece keeps breaking on me. Is there a way to make just the end piece solid instead of hollow like the other two?
The designer has replied
1
Reply
I understand what you mean. The blades are pretty fragile especially the smaller blade. I will try to make it a solid piece. Thank you for the suggestion!
0
Reply
Boosted
Replying to @JosayaJosh
You are welcome. Thanks for making a great model for us. =D
0
Reply
Boosted
Print Profile
0.16mm layer, 2 walls, 15% infill
Awesome design! Thanks for sharing. I would highly recommend using a small round file like the one in my picture. It allows the telescoping part to operate smoother. I also put a little pfte lubricant on them and they pop right out now. It can be printed in petg (the translucent blue one is); but, it's tricky and I would highly recommend using a dryer. The very tips of mine were rough but I didn't dry it first. Also go slow and I set brim a little higher.
The designer has replied
2
Reply
Absolutely amazing prints! Thank you so much for the suggestions! Very helpful👍🏼👍🏼
(Edited)1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
No problems only took around 45 minutes
The designer has replied
1
Reply
That’s great! Thanks!
0
Reply
Boosted
Great design kids are loving it fast and reliable however very fragile at least with PLA :D
The designer has replied
1
Reply
Oh fantastic! Glad you guys liked it! But yes due to its small size it is quite fragile and also a sort of replica of the actual lightsaber. I will try to fix some critical areas but it’s only gonna go so far. At the end, it’s is really just a keychain or a small fidget device. Thank you for the information. Will try to do something
(Edited)0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
The drawing is very detailed :D
(Edited)
The designer has replied
1
Reply
Great print!
0
Reply
Nice model, thanks for this
The designer has replied
1
Reply
Glad you liked it!
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Great model
The designer has replied
1
Reply
Thankss👍🏼👍🏼
0
Reply
Boosted
Print Profile
0.16mm layer, 2 walls, 15% infill
Works great with PLA! I tried to make the blade with ABS, it didn't move, so I used the only non-silk pla I had at the moment (obi wan now has a darksaber lol)
The designer has replied
1
Reply
Black saber looks great😁
0
Reply
This is fantastic!!
The designer has replied
1
Reply
Thanks a lot!!
0
Reply
© 2024 MakerWorld