The Chopsicle
Print Profile(3)
Bill of Materials
- Six 0.6cm magnets. Super glue. x 1:
Description
***I DID NOT MAKE THE PRINT PROFILES ON THIS PAGE, TRY AT YOUR OWN RISK***
---v1.2---
Changing the version back to v1 to be in sync with Thingiverse.
Minor model update - Fixed bottom for finer prints.
---v2.1---
Everyone has slightly different printers and specs, so I'm adding the .blend file for easier tinkering. The height of the model has been a problem for shorter printers. I use the Ender 5, one of the taller Ender machines.
---v2.0 Is Here!---
"The Chopsicle" v2.0 is here! Moving on from v1.0, the blades have been remade with math in mind rather then eye-balling. I have also added an additional blade to guarantee it will catch and lock. The blades now have a consistent gap of 1.25mm air between blades, so up to 80% smaller should be possible, but I haven't tested it; if anyone is brave enough to try it, let me know how it goes.
Thanks everyone for the likes and boosts. I posted this expecting maybe 4 people to download it, and for “The Chopsicle” of all things to get so many people interested, is really funny to me. This has been a lot of fun, and thanks everyone for help finding the problems!
The Chopsicle: Your Ultimate Telescoping Sword
Unleash your inner warrior and inner fat child with "The Chopsicle," the telescoping sword that bridges the gap between child-like wonder and unimaginable responsibility. Be the coolest person at the local Denny's with this bad boy!
Features:
- Telescoping Blade: Easily extend and retract the blade for quick deployment.
- Magnetic Cap: With the magnetic top, parts stay in place and don't get lost.
- Double Strength Grip: The handle is designed with 3 pipes inside for rigidness and reinforcement.
- It's a Chopsicle: What more do you want?
Perfect For:
- Little Timmy on a hot summer day.
- Canadians fending off polar bears.
- Russians fending off Russian polar bears.
- Jack Black.
~~~𝓣𝓱𝓮 𝓒𝓱𝓸𝓹𝓼𝓲𝓬𝓵𝓮~~~
Instructions:
This print is two parts, one for the main body (v2.0 highly recommended) and one for the cap, no supports needed for either print. The full build requires six 0.6cm magnets, I got mine at a Hobby Lobby and they fit nearly perfect. All in all, it's a very straight forward assembly.
Recommended Settings:
3 walls,
min 10% infill,
0.2mm layer,
Skirt or brim
Increased first layer for bed adhesion,
Cubic infill.
License
Comment & Rating (58)