If you like this model and it's not too much trouble, please hit the 👍 button - it helps out a lot 😀

This is a remix of my Mass MTG Tokens design but instead of foil labels, these use a dry erase label. You will need some clear dry erase sticker sheets to create the label. I have included 4 different label types you can use. Print the label on regular white printer paper and then cover the back and front of the paper label with the clear dry erase sticker.

For full build instructions, materials, and a pre-made PDF sheet of labels all sized and ready to print, check out Mass MTG Dry Erase Tokens

There are 4 total profiles:

• 2 for PLA
  • Use the cool plate or the high temp plate so the surfaces are flat - makes the glued on label much smoother without any bumps
• 2 for PETG
  • Use the engineering plate or the high temp plate so the surfaces are flat - makes the glued on label much smoother without any bumps
• Be sure to print both for whatever filament you plan on using.
  • The wheels are dual color (black and white) and print at 0.08mm layer height
  • The shells parts (top and bottom) are single color (black) and print at a 0.2mm layer height