感谢开源的泰坦尼克号模型。

我以此为基础设计了泰坦尼克主题夜灯。

按照我的配件表买的话，可以有以下几个亮点：

Type-C充电、2500mah大电池、金属触摸开关、三挡灯光调节（如果你是用白色耗材打印的话，最亮的档位足够看书了）

按照这样接好以后，把电池的位置和几个模块用502胶水粘起来。注意触摸开关的位置一定要对准，这一步可能需要一点耐心。

————————————————————————————————————————

Thanks to the open source Titanic model, as the basis for the design of the Titanic-themed night light

If you buy it according to my accessory list, you can have the following highlights:

Type-C charging, large 2500mah battery, metal touch switch, three levels of light adjustment (the brightest level is enough for reading if you're printing on white material)

Once assembled in this way, glue the battery position and a few modules together with 502 glue. Note that the touch switch must be aligned, this step may require a little patience.

——————————————————————————

购买清单

1.台灯电路板：https://m.tb.cn/h.gVYgWp6VCGw9pUQ?tk=dwTnWx881bj
2.LED灯板：6cm，1W，3.7V（颜色按照自己喜欢的选就行）https://m.tb.cn/h.g4OcrZnyzKxapx6?tk=4UVJWx8jzcK
3.金属触控按钮（10mm）：买的铜镜装饰盖，便宜好看，只要尺寸合适，你也可以自己挑选合适的金属帽。
https://m.tb.cn/h.gVQlNaaHyImEHz4?tk=4oHqWx8kRmo 或者 https://m.tb.cn/h.gVES9qCIsrDUQHn?tk=Z71SWx8kyHc
4.黑红白颜色导线若干
5.502强力胶
6.m2*8自攻螺丝：4个，用于固定电路板和LED灯板 https://m.tb.cn/h.gVEQ5fXsmNGEp9d?tk=tAbgWx8ovXC
7.电池：3.7V聚合物锂电池 50*50*6.5mm 2500mAh https://m.tb.cn/h.gVE97jLDgZx7AIM?tk=YVHzWx8p91y

购买链接仅供参考

Purchase List

1.Circuit board:
https://m.tb.cn/h.gVYgWp6VCGw9pUQ?tk=dwTnWx881bj
2.LED light：6cm，1W，3.7V（Colors according to preference）
https://m.tb.cn/h.g4OcrZnyzKxapx6?tk=4UVJWx8jzcK
3.Metal touch button (10mm) : bought copper mirror decorative cover, cheap and good-looking, as long as the size is appropriate, you can also choose the right metal cap.
https://m.tb.cn/h.gVQlNaaHyImEHz4?tk=4oHqWx8kRmo 
or
https://m.tb.cn/h.gVES9qCIsrDUQHn?tk=Z71SWx8kyHc
4.Number of wires
5.502 Super glue
6.m2*8 self-tapping screws: 4 for fixing circuit boards and LED lightshttps://m.tb.cn/h.gVEQ5fXsmNGEp9d?tk=tAbgWx8ovXC
7.Battery: 3.7V polymer lithium battery 50*50*6.5mm 2500mAh https://m.tb.cn/h.gVE97jLDgZx7AIM?tk=YVHzWx8p91y

Purchase link for reference only