Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. 

If you find this model useful, feel free to buy me a coffee. 

Here are reconfigurable 22.5 & 45 degree 3-Way Elbows designed to fit 1/2" Schedule 40 PVC pipe. They are part of a series of 1/2" PVC fittings I'm designing to supplement conventional plumbing fittings. Please check my designs for other 1/2" fittings.

These elbows can be used to make angled roofs for structures and other forms. My original purpose was a roof for a small, plastic-wrapped greenhouse to hold plants over the winter.

If you're making a roof, you might notice that each corner requires a different fitting. In order to make one design instead of four, I made the elbows reconfigurable. The 22.5 and 45 degree fittings each allow you to make 4 different elbows and 1 Y fitting. Print 1 of either the 22.5 or the 45 degree fitting, then print 2 sleeves and 2 caps. Slide the sleeves into the holes of your choice and cap the other holes. Glue for a secure fit.

I put the triangular holes in the pipes to help the glue dry. On the first iteration, I noticed that being air tight prohibited drying. The ledges on the top of the horizontal holes make it printable without support structures.

I will continue to add new fittings to the series and share them as a derivative of my original 3-Way Elbow. Please let me know if there is a fitting you need that I haven't created yet.

You are highly encouraged to make new derivatives. 

UPDATE 2015-07-03: I tightened the tolerances slightly for a better fit. Make sure your printer is well calibrated before printing.

Update 2014-11-11: For a more elegant solution that uses less plastic, try out my new adjustable angle 3-way elbow in my designs.