A Simple Wallet

Introduction

I bring you something very simple and utilitarian. As with previous projects, there's already a proliferation of similar items on 3D printing websites. – This is a card wallet featuring a clip that can be used both to securely close the wallet and to hold a few banknotes.

I took this opportunity to use carbon fiber effect build plates. Although “faux finishes” aren't typically my favorite thing, the aesthetic result is interesting, and I was eager to experiment with some build plates that I have and this wallet project provided the perfect excuse.

I've used the Carbon Fiber Surface from Bambu 3D Effect Sheet

The assembly is straightforward and can accommodate five cards, with the option to adjust for more or fewer cards, at the moment you can use the scale tool at the correct axis on the slicer of you preference.

Inserting and removing cards clip

A larger version, for 10 cards will be made available in a couple of days.

I know it might seem like the cards are punctured, but that's not the case. Instead, "blisters" are used for each card, allowing for easy handling without the risk of them falling out.

Variations and Material used:

The dark material used is the fantastic "Lava Grey," which is PLA+CF from Bambu Lab. However, you can use any material of your preference (PLA).

I chose this one for its deep matte finish. On the other hand, I know I lost some of the three-dimensional effect offered by the 3D build plate. Nonetheless, I personally prefer the subdued effect. If you desire maximum impact, then use regular PLA (be careful, these build plates are not suitable for PETG). Any of the Bambu lab regular PLA with the color of your choice will do, this red if the Prusament.

Assembling

The assembly is quite simple. There is only one consideration, which may depend on your printer. In some cases, the nut might offer some resistance when being screwed in. However, it's just a matter of patience and applying a bit more tightening force. If it proves impossible, first check if the thread was printed correctly or if there's any filament out of place. If necessary, you can adjust the scale on the two lateral axes to widen it.

Assembling clip

Curious About My Tools? Check This Out!

For those of you who often ask about the tools I use to bring ideas to life, this article, The Journey From Idea To Object (Part I), offers some insights into the initial stages. It highlights the use of various tools, including software like Autodesk Fusion for CAD design, Blender for render and Bambu Studio for 3D printing preparation, and other... So, if you're curious about the software and hardware too, that I've incorporate in my workflow, take a look at the link for more details!" – Visit https://designrepcom.com/ for much more.

Change Log

• (04-06-2024)- Initial Release

Curious About My Tools? Check This Out!

For those of you who often ask about the tools I use to bring ideas to life, this article, The Journey From Idea To Object (Part I), offers some insights into the initial stages. It highlights the use of various tools, including software like Autodesk Fusion for CAD design, Blender for render and Bambu Studio for 3D printing preparation, and other... So, if you're curious about the software and hardware too, that I've incorporate in my workflow, take a look at the link for more details!" – Visit https://designrepcom.com/ for much more.